If you have a MiSTer USB Hub with a wired Micro USB cable attached, and wish to streamline your MiSTer setup this connector kit offers a neat low profile connection via a right angled gold plated Micro USB connector which plugs into the DE10 Nano boards Micro USB socket, the 4 pin socket plugs directly into a 4 pin header, this does need to be soldered into the USB hub board.
The installation procedure involves desoldering the Micro USB cables wires which are soldered into the P1 socket holes on the MiSTer USB Hub PCB. Once the wires have been removed a desolder pump may be required to clean out the P1 holes on the PCB so the 4 pin header can be soldered into place.
✅ Suitable For MiSTer FPGA USB Hub v1.2 & v2.1
✅ Includes a 4 Pin Header
| Option1 | Option1 |
|---|
Be the first to review “Micro USB Bracket Hub Connector Kit”
Related products
Accessories
When connecting the Raspberry Pi based MT32-Pi to the MiSTer via a USB 3.0 A-to-A cable, it’s important to use a short cable to ensure stable performance, this MT32-Pi USB 3.0 cable is the perfect choice. Since I²C is not intended for long-distance transmission, longer cables can cause degradation due to capacitance or signal reflections. [...]
Accessories
A small and compact USB Bluetooth v4.0 dongle suitable for use with the MiSTer FPGA, using the CSR8510 chipset for maximum compatibility. Connect a number of devices simultaneously, the Bluetooth adapter also supports full backward compatibility with Bluetooth versions 2.0, 2.1 and 3.0 devices. The MiSTer Bluetooth adapter works with many popular Bluetooth based controllers [...]
Accessories
If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket [...]
Accessories
If your MiSTer USB Hub has a Micro USB socket installed, and you wish to streamline your MiSTer setup, this bridge connection offers a neat solution via two long Micro USB connectors, one plugs into the DE10-Nano boards Micro USB socket and the other plugs in the Micro USB socket on your MiSTer USB Hub [...]
Accessories
The power supply splitter cable is connected to the male end of the power supply or the male end of an inline power switch, with two male connectors at each end of the splitter plugging directly into the DE-10 Nano board and USB hub board. ✅ For Original & Aftermarket Power Supplies ✅ High Quality [...]
Accessories
This neat little plug designed and produced by MiSTer Addons allows you to connect the Digital IO board and DE10-Nano DC power sockets together. The DC jumper is only used with the Digital IO board or BlisSTer board. To use the built in Digital IO board power switch, simply link your power supply to the [...]
Accessories
Perfect for connecting your MiSTer setup to a USB hub or BlisSTer board, the USB bridge connector offers a clean solution via two short Micro USB connectors, one plugs into the DE10-Nano’s Micro USB socket and the other plugs into the Micro USB socket on the BlisSTer board or official MiSTer USB Hub. ✅ Suitable [...]
Accessories
A one meter long mains cable featuring an IEC C13 connector on one end and an 3 pin UK moulded plug on the other. This power lead transfers mains power from a UK mains socket to a device with an IEC inlet. Designed for use with IEC C14 devices such as the high quality MiSTer [...]
Reviews
There are no reviews yet.