A small and compact USB Bluetooth v4.0 dongle suitable for use with the MiSTer FPGA, using the CSR8510 chipset for maximum compatibility. Connect a number of devices simultaneously, the Bluetooth adapter also supports full backward compatibility with Bluetooth versions 2.0, 2.1 and 3.0 devices.
The MiSTer Bluetooth adapter works with many popular Bluetooth based controllers including the Sony PlayStation DualShock 3, Sony PlayStation DualShock 4, Nintendo Wii Remote (Wiimote), Nintendo Wii U Pro, Nintendo Switch Pro Controllers, Xbox One, Xbox One Elite and 8BitDo Bluetooth gaming controllers.
Firstly plug the Bluetooth adapter into a USB port, a powered USB hub is always recommend when using a Bluetooth adapter, then to configure the Bluetooth adapter just run the script bluetooth_pair.sh either from the Menu core on the MiSTer FPGA or via SSH. If configuration has been successful the MiSTer Menu core will display a Bluetooth icon to show Bluetooth is paired and connected.
More information on specific Bluetooth device configuration can be found documented on the MiSTer Wiki Bluetooth page.
✅ Compatible With the MiSTer FPGA
✅ USB 2.0 Interface
✅ Low Power Consumption
✅ Bluetooth V4.0 + EDR V2.1/2.0/3.0
| Option1 | Option1 |
|---|
Be the first to review “MiSTer FPGA Bluetooth Adapter”
Related products
Accessories
If your MiSTer USB Hub has a Micro USB socket installed, and you wish to streamline your MiSTer setup, this bridge connection offers a neat solution via two long Micro USB connectors, one plugs into the DE10-Nano boards Micro USB socket and the other plugs in the Micro USB socket on your MiSTer USB Hub [...]
Accessories
The power supply splitter cable is connected to the male end of the power supply or the male end of an inline power switch, with two male connectors at each end of the splitter plugging directly into the DE-10 Nano board and USB hub board. ✅ For Original & Aftermarket Power Supplies ✅ High Quality [...]
Accessories
A one meter long mains cable featuring an IEC C13 connector on one end and an 3 pin UK moulded plug on the other. This power lead transfers mains power from a UK mains socket to a device with an IEC inlet. Designed for use with IEC C14 devices such as the high quality MiSTer [...]
Accessories
A two meter long mains cable with IEC C7 (figure of 8) connector and a selection of interchangeable country specific plug heads, this is designed to allow electricity to flow from point A to point B 🙂 Perfect for use with this high quality MiSTer DE10-Nano power supply. ✅ 2 Meter Long Cable ✅ UK [...]
Accessories
If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket [...]
Accessories
A compact USB WiFi dongle perfect for use with the MiSTer FPGA. Firstly plug the WiFi adapter into a USB port, then to configure the WiFi adapter just run the script wifi.sh either from the Menu core on the MiSTer FPGA or via SSH. Reboot the MiSTer once WiFi network configuration has been completed. If [...]
Accessories
An easy to connect inline on off rocker switch which is connected to the male end of your power supply with a female connector, and the male leads of the inline switch connector plug directly into the splitter lead connected to your MiSTer FPGA DE-10 Nano board and your USB hub. ✅ Suitable For Original [...]
Accessories
If you are looking for the best, this is a high quality power supply for your MiSTer FPGA setup, you need look no further as this is possibly the ultimate MiSTer power supply providing clean power at 5 volts and up to 4 amps, plenty of overhead for any additional power requirements. Mean Well are [...]
Reviews
There are no reviews yet.