A one meter long mains cable featuring an IEC C13 connector on one end and an 3 pin UK moulded plug on the other. This power lead transfers mains power from a UK mains socket to a device with an IEC inlet.
Designed for use with IEC C14 devices such as the high quality MiSTer upgraded 4 amp power supply.
✅ 1 Meter Long Cable
✅ 3 Pin UK Moulded Plug
✅ 5A Fused For 240V
✅ Lead End Straight IEC C13 Jack
✅ British Standards Approved BS-1363 & CE Certification
| Option1 | Option1 |
|---|
Be the first to review “UK Plug Mains Power Cable To IEC C13 Lead”
Related products
Cases
Display the inner workings of your MiSTer with this transparent case! This sleek case offers optimal protection for your MiSTer. It features ventilation slots on the top to allow airflow from the fan mounted on the IO board, and includes three 3D-printed button spacers to ensure full functionality of the IO board’s push buttons. Thanks [...]
The hybrid ARM / FPGA chip can reach very high temperatures when running complex MiSTer cores effecting overall stability resulting in errors or crashes. This is the ultimate MiSTer heatsink, produced from a solid copper bar, the fins are manufactured by accurately peeling each fin from the bar of solid copper, they are an integral [...]
A cost effective simple protection solution for your MiSTer, consisting of a top and bottom Perspex acrylic plate offered in a variety of colours. The top plate has ventilation slots to allow airflow from the IO board mounted fan, also a cut away on the top plate allows for easy access to the user push [...]
Accessories
A compact USB WiFi dongle perfect for use with the MiSTer FPGA. Firstly plug the WiFi adapter into a USB port, then to configure the WiFi adapter just run the script wifi.sh either from the Menu core on the MiSTer FPGA or via SSH. Reboot the MiSTer once WiFi network configuration has been completed. If [...]
Accessories
If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket [...]
Accessories
When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board. This high quality USB 3.0 extension has a shielded [...]
Cases
Show off your MiSTer’s insides with a transparent case! This stylish case is designed for the perfect protection of your MiSTer. The top of the case has ventilation slots to allow airflow from an IO board mounted fan, also three 3D printed button spacers allow you to use your MiSTer IO boards user push buttons [...]
Cooling
A minimal cost effective active cooling solution for your MiSTer build, if you do not require an IO Board but still wish to adequately cool the ARM / FPGA chip this is the perfect solution a super quiet fan, mounted on a solid aluminium heatsink. Installation is simple just remove the film from the thermal [...]
Reviews
There are no reviews yet.