A male DC jack to male DC jack jumper cable, this is perfect for use with a MiSTer Digital IO board allowing for powering of the USB Hub directly from the DE10-Nano.
If you are using the Digital I/O MiSTer addon board just connect your DE10-Nano power supply into the Digital IO boards DC power socket, then connect one end of the male jumper cable into the DE10-Nano boards DC power socket and the other male end into the USB Hub’s DC power socket. You can now control all the boards power via the on/off switch on the Digital IO board.
✅ Male To Male DC Power Plugs
✅ High Quality Connectors
| Option1 | Option1 |
|---|
Be the first to review “MiSTer Male to Male DC Jack Link Cable”
Related products
A cost effective simple protection solution for your MiSTer, consisting of a top and bottom Perspex acrylic plate offered in a variety of colours. The top plate has ventilation slots to allow airflow from the IO board mounted fan, also a cut away on the top plate allows for easy access to the user push [...]
Cooling
A minimal cost effective active cooling solution for your MiSTer build, if you do not require an IO Board but still wish to adequately cool the ARM / FPGA chip this is the perfect solution a super quiet fan, mounted on a solid aluminium heatsink. Installation is simple just remove the film from the thermal [...]
Accessories
If you are looking for the best, this is a high quality power supply for your MiSTer FPGA setup, you need look no further as this is possibly the ultimate MiSTer power supply providing clean power at 5 volts and up to 4 amps, plenty of overhead for any additional power requirements. Mean Well are [...]
Accessories
Perfect for connecting your MiSTer setup to a USB hub or BlisSTer board, the USB bridge connector offers a clean solution via two short Micro USB connectors, one plugs into the DE10-Nano’s Micro USB socket and the other plugs into the Micro USB socket on the BlisSTer board or official MiSTer USB Hub. ✅ Suitable [...]
The hybrid ARM / FPGA chip can reach very high temperatures when running complex MiSTer cores effecting overall stability resulting in errors or crashes. This is the ultimate MiSTer heatsink, produced from a solid copper bar, the fins are manufactured by accurately peeling each fin from the bar of solid copper, they are an integral [...]
Accessories
A two meter long mains cable with IEC C7 (figure of 8) connector and a selection of interchangeable country specific plug heads, this is designed to allow electricity to flow from point A to point B 🙂 Perfect for use with this high quality MiSTer DE10-Nano power supply. ✅ 2 Meter Long Cable ✅ UK [...]
Accessories
Building a custom case to house your MiSTer? If you need to add external push buttons and LEDs this pair of extension leads allows you to remotely mount buttons and LEDs. The pair of leads connect to the 5 pin and 7 pin header sockets on MiSTer Digital and Analog IO boards. The circuit diagrams [...]
Accessories
A small and compact USB Bluetooth v4.0 dongle suitable for use with the MiSTer FPGA, using the CSR8510 chipset for maximum compatibility. Connect a number of devices simultaneously, the Bluetooth adapter also supports full backward compatibility with Bluetooth versions 2.0, 2.1 and 3.0 devices. The MiSTer Bluetooth adapter works with many popular Bluetooth based controllers [...]
Reviews
There are no reviews yet.