MiSTer Accessories
Useful selection of MiSTer FPGA Accessories a range of essential addons for your MiSTer , if you are looking for a WiFi adapter, Bluetooth dongle or a high quality power supply, you will definitely find it here!
Accessories
If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket [...]
Accessories
Building a custom case to house your MiSTer? If you need to add external push buttons and LEDs this pair of extension leads allows you to remotely mount buttons and LEDs. The pair of leads connect to the 5 pin and 7 pin header sockets on MiSTer Digital and Analog IO boards. The circuit diagrams [...]
Accessories
A two meter long mains cable with IEC C7 (figure of 8) connector and a selection of interchangeable country specific plug heads, this is designed to allow electricity to flow from point A to point B 🙂 Perfect for use with this high quality MiSTer DE10-Nano power supply. ✅ 2 Meter Long Cable ✅ UK [...]
Accessories
If you have a MiSTer USB Hub with a wired Micro USB cable attached, and wish to streamline your MiSTer setup this connector kit offers a neat low profile connection via a right angled gold plated Micro USB connector which plugs into the DE10 Nano boards Micro USB socket, the 4 pin socket plugs directly [...]
Accessories
A small and compact USB Bluetooth v4.0 dongle suitable for use with the MiSTer FPGA, using the CSR8510 chipset for maximum compatibility. Connect a number of devices simultaneously, the Bluetooth adapter also supports full backward compatibility with Bluetooth versions 2.0, 2.1 and 3.0 devices. The MiSTer Bluetooth adapter works with many popular Bluetooth based controllers [...]
Accessories
This neat little plug designed and produced by MiSTer Addons allows you to connect the Digital IO board and DE10-Nano DC power sockets together. The DC jumper is only used with the Digital IO board or BlisSTer board. To use the built in Digital IO board power switch, simply link your power supply to the [...]
Accessories
If you are looking for the best, this is a high quality power supply for your MiSTer FPGA setup, you need look no further as this is possibly the ultimate MiSTer power supply providing clean power at 5 volts and up to 4 amps, plenty of overhead for any additional power requirements. Mean Well are [...]
Accessories
A compact USB WiFi dongle perfect for use with the MiSTer FPGA. Firstly plug the WiFi adapter into a USB port, then to configure the WiFi adapter just run the script wifi.sh either from the Menu core on the MiSTer FPGA or via SSH. Reboot the MiSTer once WiFi network configuration has been completed. If [...]
Accessories
An easy to connect inline on off rocker switch which is connected to the male end of your power supply with a female connector, and the male leads of the inline switch connector plug directly into the splitter lead connected to your MiSTer FPGA DE-10 Nano board and your USB hub. ✅ Suitable For Original [...]
Accessories
A male DC jack to male DC jack jumper cable, this is perfect for use with a MiSTer Digital IO board allowing for powering of the USB Hub directly from the DE10-Nano. If you are using the Digital I/O MiSTer addon board just connect your DE10-Nano power supply into the Digital IO boards DC power [...]
Accessories
The power supply splitter cable is connected to the male end of the power supply or the male end of an inline power switch, with two male connectors at each end of the splitter plugging directly into the DE-10 Nano board and USB hub board. ✅ For Original & Aftermarket Power Supplies ✅ High Quality [...]
Accessories
When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board. This high quality USB 3.0 extension has a shielded [...]
Accessories
If your MiSTer USB Hub has a Micro USB socket installed, and you wish to streamline your MiSTer setup, this bridge connection offers a neat solution via two long Micro USB connectors, one plugs into the DE10-Nano boards Micro USB socket and the other plugs in the Micro USB socket on your MiSTer USB Hub [...]
Accessories
Perfect for connecting your MiSTer setup to a USB hub or BlisSTer board, the USB bridge connector offers a clean solution via two short Micro USB connectors, one plugs into the DE10-Nano’s Micro USB socket and the other plugs into the Micro USB socket on the BlisSTer board or official MiSTer USB Hub. ✅ Suitable [...]
Accessories
When connecting the Raspberry Pi based MT32-Pi to the MiSTer via a USB 3.0 A-to-A cable, it’s important to use a short cable to ensure stable performance, this MT32-Pi USB 3.0 cable is the perfect choice. Since I²C is not intended for long-distance transmission, longer cables can cause degradation due to capacitance or signal reflections. [...]
Accessories
A one meter long mains cable featuring an IEC C13 connector on one end and an 3 pin UK moulded plug on the other. This power lead transfers mains power from a UK mains socket to a device with an IEC inlet. Designed for use with IEC C14 devices such as the high quality MiSTer [...]