MiSTer SNAC Controller Adapters
$5.99
Individual controller adapters for your MiSTer SNAC board, supporting SNES, NES, Mega Drive, Master System, 32X, Atari 7800 and TurboGrafx-16 cores.
Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Are you looking for some additional individual controller adapters for your USB SNAC board? No problem just select which you need!
MiSTer SNAC support is enabled in the following cores including SNES, NES, Sega Master System, Genesis / Mega Drive, Mega CD, 32X, Atari 7800 and TurboGrafx-16 / TurboGrafx CD. The number of supported cores is growing as SNAC is integrated into more of the official MiSTer project cores.
Each specific SNAC controller adapter only functions with it’s respective core, for example the SNES controller adapter is only suitable for use on the SNES core.
The SEGA adapter requires a MiSTer Analog IO v6.1 or Digital IO v1.2 to function correctly, all earlier MiSTer project IO board versions will require a hardware modification to the MiSTer IO board to support the SEGA adapter.
The Atari adapter also requires an ADC input and a 3.5mm AUX cable if you wish to use the Atari paddle controller. However the Atari joystick controller does not require any additional hardware to function.
These controller specific adapters are only suitable for use with the USB SNAC Adapter For MiSTer.
✅ Suitable For MiSTer USB SNAC Adapter
✅ High Quality Connectors
✅ Fully Assembled & Tested
| Controller Adapter Type: | NES Adapter, SNES Adapter, SEGA Adapter, PC Engine Adapter, TurboGrafx 16 Adapter, Atari Adapter, GB Link Adapter |
|---|
Be the first to review “MiSTer SNAC Controller Adapters”
Related products
Expansion Boards
BlisSTer Rev 3 add-on board for MiSTer with a five port USB hub, integrated power switch and two low latency ports for Bliss-Box controller adapters. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Expansion Boards
Official MiSTer endorsed mt32-pi HAT that links a Raspberry Pi directly to the MiSTer with no extra power, audio or MIDI cabling for plug and play MIDI.
Stand-alone N64 SNAC adapter for the MiSTer Nintendo 64 core, supporting native controllers, Rumble Pak, Controller Pak, Transfer Pak and more. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Expansion Boards
Seven port USB hub v2.1 for MiSTer, connecting neatly to the DE10-Nano through the supplied Micro USB bracket connector so you can add multiple peripherals. Related guides: SNAC vs BlisSTer vs USB controllers and our MiSTer FPGA beginner's guide.
Short shielded USB 3.0 male to female extension cable for MiSTer SNAC setups, reducing strain on the User IO port while keeping signal quality high. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Expansion Boards
Extra Slim 128MB SDRAM module for MiSTer, essential for Neo Geo and other large cores that need low latency memory the DE10-Nano DDR3 cannot supply. Related guides: MiSTer SDRAM: 32MB vs 128MB and our MiSTer FPGA beginner's guide.
Stand-alone PSX SNAC adapter for the MiSTer PlayStation core with support for original controllers, rumble, light guns, NeGcon and Jogcon pads. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
USB3 SNAC adapter for MiSTer giving zero frames of input latency when you connect original console controllers through the matching adapters sold separately. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Reviews
There are no reviews yet.