When connecting the Raspberry Pi based MT32-Pi to the MiSTer via a USB 3.0 A-to-A cable, it’s important to use a short cable to ensure stable performance, this MT32-Pi USB 3.0 cable is the perfect choice.
Since I²C is not intended for long-distance transmission, longer cables can cause degradation due to capacitance or signal reflections. If you notice issues like a distorted OLED display or unreliable synth switching, the cable’s length or quality is likely the cause.
Each MT32-Pi USB cable has been individually tested on a live MT32-Pi setup to ensure flawless performance.
✅ USB 3.0 Cable
✅ High Quality USB Connectors
✅ Approximate Length 23cm
MT32-Pi USB Cable Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
✅ QMTECH Cyclone V
| Option1 | Option1 |
|---|
Be the first to review “MT32-Pi USB Cable”
Related products
Accessories
If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket [...]
Accessories
A one meter long mains cable featuring an IEC C13 connector on one end and an 3 pin UK moulded plug on the other. This power lead transfers mains power from a UK mains socket to a device with an IEC inlet. Designed for use with IEC C14 devices such as the high quality MiSTer [...]
Accessories
If you are looking for the best, this is a high quality power supply for your MiSTer FPGA setup, you need look no further as this is possibly the ultimate MiSTer power supply providing clean power at 5 volts and up to 4 amps, plenty of overhead for any additional power requirements. Mean Well are [...]
Accessories
A small and compact USB Bluetooth v4.0 dongle suitable for use with the MiSTer FPGA, using the CSR8510 chipset for maximum compatibility. Connect a number of devices simultaneously, the Bluetooth adapter also supports full backward compatibility with Bluetooth versions 2.0, 2.1 and 3.0 devices. The MiSTer Bluetooth adapter works with many popular Bluetooth based controllers [...]
Accessories
An easy to connect inline on off rocker switch which is connected to the male end of your power supply with a female connector, and the male leads of the inline switch connector plug directly into the splitter lead connected to your MiSTer FPGA DE-10 Nano board and your USB hub. ✅ Suitable For Original [...]
Accessories
Building a custom case to house your MiSTer? If you need to add external push buttons and LEDs this pair of extension leads allows you to remotely mount buttons and LEDs. The pair of leads connect to the 5 pin and 7 pin header sockets on MiSTer Digital and Analog IO boards. The circuit diagrams [...]
Accessories
If your MiSTer USB Hub has a Micro USB socket installed, and you wish to streamline your MiSTer setup, this bridge connection offers a neat solution via two long Micro USB connectors, one plugs into the DE10-Nano boards Micro USB socket and the other plugs in the Micro USB socket on your MiSTer USB Hub [...]
Accessories
When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board. This high quality USB 3.0 extension has a shielded [...]
Reviews
There are no reviews yet.