MiSTer FPGA WiFi Adapter
$6.99
Compact USB WiFi dongle for MiSTer FPGA: plug it in, run wifi.sh from the Menu core or over SSH, then reboot once your network is configured.
Related guide: what you need for a first MiSTer FPGA build.
100 in stock
A compact USB WiFi dongle perfect for use with the MiSTer FPGA.
Firstly plug the WiFi adapter into a USB port, then to configure the WiFi adapter just run the script wifi.sh either from the Menu core on the MiSTer FPGA or via SSH. Reboot the MiSTer once WiFi network configuration has been completed. If configuration has been successful once the MiSTer has rebooted the Menu core will display a WiFi icon to show WiFi is connected.
Manual WiFi configuration can be completed by following the steps documented in the MiSTer Wiki.
✅ Compatible With MiSTer FPGA
✅ USB 2.0 Interface
✅ Data Rate Up To 300Mbps
✅ IEEE 802.11 b/g/n Standards
| Option1 | Option1 |
|---|
Be the first to review “MiSTer FPGA WiFi Adapter”
Related products
Accessories
One metre UK mains power lead with a moulded 3 pin plug and IEC C13 connector, perfect for powering the MiSTer DE10-Nano supply from a UK socket. Related guide: what you need for a first MiSTer FPGA build.
Accessories
Short USB 3.0 A-to-A cable for connecting an MT32-Pi to the MiSTer, keeping the I2C link stable by avoiding capacitance and signal reflection.
Accessories
Low profile Micro USB bracket connector kit for MiSTer, replacing a wired hub cable with a right angled gold plated plug and a 4 pin header.
Accessories
Splitter cable for MiSTer that feeds the DE10-Nano and USB hub from one power supply, with two male plugs and a female connector for the PSU. Related guide: MiSTer cooling and power guide.
Accessories
Compact DC power jumper by MiSTer Addons that links the Digital IO board and DE10-Nano power sockets so the IO board switch controls the build. Related guide: MiSTer cooling and power guide.
Accessories
High quality Mean Well 5 volt 4 amp power supply for MiSTer FPGA, delivering clean regulated power with plenty of headroom for add-on boards. Related guides: MiSTer cooling and power guide and our MiSTer FPGA beginner's guide.
Accessories
Long twin Micro USB bridge for MiSTer, linking the DE10-Nano micro USB socket straight to a USB hub that uses a Micro USB socket for a tidier setup.
Accessories
Two metre long IEC C7 figure of eight mains cable with interchangeable UK and European plug heads, made for the MiSTer DE10-Nano power supply.
Reviews
There are no reviews yet.