The transparent BlisSTer case provides tough colourful protection for your MiSTer build, it is great for those who want to show off the PCB design and IC components, protect and admire!
This elegant case is designed for complete protection of your MiSTer. The top casing has ventilation slots allowing airflow from an IO board mounted fan, also three 3D printed button spacers allow for the use of the MiSTer IO boards user push buttons. Due to the transparent nature of the MiSTer case all the status LED’s are still visible through the casing, finally the MiSTer FPGA logo is laser engraved into the top plate.
The BlisSTer acrylic case is only suitable for the BlisSTer Revision 2 & 3 hubs, this case is not compatible with any other hubs including the older earlier BlisSTer board versions. The case is compatible with the real time clock board (RTC) and the audio tape input board (ADC In).
The BlisSTer case fitting kit includes all required parts to install the case onto your MiSTer build. The fitting kit contains eight brass stand-offs, eight screws, four silicone stick on anti-slip feet for the case base to keep your MiSTer stable and a replacement BlisSTer board power switch button cap.
✅ Only For BlisSTer Revision 2 & 3 Hubs
✅ Precision Laser Cut & Engraved
✅ All Ports Feature Laser Engraved Labels
✅ Manufactured From Perspex® Cast Acrylic
✅ Fitting Kit Included
BlisSTer Case Compatibility:
✅ Terasic DE10-Nano
❌ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V
| MiSTer Case Colour: | Shadow Grey, Crystal Clear, Looking Glass, Neptune Blue, Acid Green, Helios Yellow |
|---|---|
| IO Board Type: | Analog IO v5.5 – v6.1, Digital IO v1.2 |
Be the first to review “BlisSTer Case Acrylic”
Related products
If your MiSTer build has no need of an IO board but you still want an active cooling solution, while also providing protection to your build and looking good, then the acrylic fan plate kit is what you need. Included with the MiSTer fan plate kit is a cast acrylic top plate finished in either [...]
Expansion Boards
The BlisSTer Rev 3 board is an advanced peripheral add-on board for the MiSTer providing the following, a five port USB hub, an integrated on/off switch to control power to the MiSTer and additionally it has two low latency ports, these allow for the direct connection of Bliss-Box controller adapters to the MiSTer. If you [...]
Cooling
A minimal cost effective active cooling solution for your MiSTer build, if you do not require an IO Board but still wish to adequately cool the ARM / FPGA chip this is the perfect solution a super quiet fan, mounted on a solid aluminium heatsink. Installation is simple just remove the film from the thermal [...]
Accessories
The power supply splitter cable is connected to the male end of the power supply or the male end of an inline power switch, with two male connectors at each end of the splitter plugging directly into the DE-10 Nano board and USB hub board. ✅ For Original & Aftermarket Power Supplies ✅ High Quality [...]
Accessories
If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket [...]
Accessories
Building a custom case to house your MiSTer? If you need to add external push buttons and LEDs this pair of extension leads allows you to remotely mount buttons and LEDs. The pair of leads connect to the 5 pin and 7 pin header sockets on MiSTer Digital and Analog IO boards. The circuit diagrams [...]
Cases
Display the inner workings of your MiSTer with this transparent case! This sleek case offers optimal protection for your MiSTer. It features ventilation slots on the top to allow airflow from the fan mounted on the IO board, and includes three 3D-printed button spacers to ensure full functionality of the IO board’s push buttons. Thanks [...]
Accessories
A male DC jack to male DC jack jumper cable, this is perfect for use with a MiSTer Digital IO board allowing for powering of the USB Hub directly from the DE10-Nano. If you are using the Digital I/O MiSTer addon board just connect your DE10-Nano power supply into the Digital IO boards DC power [...]
Reviews
There are no reviews yet.