Expansion Boards
Audio tape input board for MiSTer with a 3.5mm headphone jack that plugs into the DE10-Nano J15 ADC header, adding cassette loading to supported cores.
Cases
Transparent acrylic BlisSTer case for MiSTer with ventilation slots for an IO board fan, protecting your build while showing off the PCB and components. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Expansion Boards
BlisSTer Rev 3 add-on board for MiSTer with a five port USB hub, integrated power switch and two low latency ports for Bliss-Box controller adapters. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Accessories
Adapter cable that lets you power a MiSTer Pi from the Mean Well DC supply, converting the female DC barrel socket to a USB Type C male plug. Related guides: MiSTer power and cooling and MiSTer Pi vs DE10-Nano.
Accessories
Pair of extension leads for MiSTer that let you mount LEDs and push buttons on a custom case, connecting to the 5 pin and 7 pin IO board headers.
Accessories
Two metre long IEC C7 figure of eight mains cable with interchangeable UK and European plug heads, made for the MiSTer DE10-Nano power supply.
Accessories
Low profile Micro USB bracket connector kit for MiSTer, replacing a wired hub cable with a right angled gold plated plug and a 4 pin header.
Expansion Boards
Analog IO board v6.1 for MiSTer with VGA, RGB and YPbPr output via DB15, 3.5mm analog and Mini-TOSLINK digital audio, and a second microSD slot. Related guide: what you need for a first MiSTer FPGA build.
Cases
Transparent acrylic case for MiSTer with a ventilated top for an IO board fan and three 3D printed button spacers so the user push buttons stay usable.
Expansion Boards
Digital IO board v1.2 for MiSTer FPGA with protected power switch, 3.5mm ADC tape input, Mini-TOSLINK and TOSLINK audio plus a second microSD slot. Related guide: what you need for a first MiSTer FPGA build.
Cooling
Quiet 40mm fan mounted on a solid aluminium heatsink, giving the DE10-Nano ARM and FPGA chip effective active cooling without needing an IO board. Related guide: MiSTer cooling and power guide.
Cooling
Acrylic fan plate kit for MiSTer builds without an IO board, combining a cast acrylic top plate, quiet fan and heatsink for cooling and protection. Related guide: MiSTer cooling and power guide.
Bare add-on PCBs for building MiSTer FPGA daughter boards from scratch, ideal if you have soldering skills and prefer to source your own components.
Accessories
Compact USB Bluetooth 4.0 dongle for MiSTer using the CSR8510 chipset, connecting controllers and keyboards and staying backward compatible. Related guide: how controllers connect to MiSTer.
Accessories
Compact DC power jumper by MiSTer Addons that links the Digital IO board and DE10-Nano power sockets so the IO board switch controls the build. Related guide: MiSTer cooling and power guide.
Accessories
High quality Mean Well 5 volt 4 amp power supply for MiSTer FPGA, delivering clean regulated power with plenty of headroom for add-on boards. Related guides: MiSTer cooling and power guide and our MiSTer FPGA beginner's guide.
Solid copper finned heatsink for MiSTer, peeling each fin from a solid copper bar for maximum heat dissipation and rock solid core stability. Related guide: MiSTer cooling and power guide.
Accessories
Compact USB WiFi dongle for MiSTer FPGA: plug it in, run wifi.sh from the Menu core or over SSH, then reboot once your network is configured. Related guide: what you need for a first MiSTer FPGA build.
Passive heatsink for the DE10-Nano ARM and FPGA chip, keeping temperatures down for rock solid operation with the most demanding MiSTer cores. Related guide: MiSTer cooling and power guide.
Accessories
Inline rocker on off switch for MiSTer power supplies, connecting between the supply and splitter lead so you can switch the DE10-Nano and hub together. Related guide: MiSTer cooling and power guide.