The MiSTer FPGA’s N64 SNAC adapter is a stand-alone Serial Native Accessory Converter (SNAC) adapter that provides a direct interface with the MiSTer Nintendo 64 core. It enables seamless integration with native controllers and accessories, including the Rumble Pak, Controller Pak, Transfer Pak, VRU (Voice Recognition Unit), Keyboard, Mouse, and Microphone.
Seeking a zero input lag gaming experience with the Nintendo 64 core? SNAC delivers precisely that when linked to the MiSTer FPGA’s User Port. This add-on adapter features four controller ports, ensuring top-notch performance for dedicated gamers or speedrunners who demand pinpoint accuracy and responsiveness with original Nintendo 64 controllers and accessories, all without any lag.
Do not combine this dedicated N64 adapter with any other SNAC adapter level shifter board; it is designed as a stand-alone device. For optimal connection, it is advised to use a short male-to-female USB 3.0 extension cable between the N64 adapter and the User Port on the MiSTer.
The MiSTer N64 SNAC adapter only functions with the respective MiSTer N64 core.
The Nintendo 64 SNAC adapter requires a MiSTer Analog IO board v6.1 or Digital IO board v1.2 and newer to function correctly. Additionally, this Nintendo 64 SNAC adapter does support other IO board types providing they have a User IO port.
Many thanks go to Jonathan Dagnillo of Dinierto Designs for the creation of the N64 SNAC Adapter Shell for MiSTer FPGA which is licensed under CC BY-SA 3.0
✅ Use Original Nintendo 64 (N64) Controllers
✅ 4 Players Supported
✅ Requires Analog IO v6.0 or v6.1 / Digital IO v1.2 / AV Pro v9.2
✅ Optional Right Angle USB 3.0 Extension Cable
✅ Fully Assembled & Each Port Tested
SNAC Nintendo 64 Adapter For MiSTer Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
✅ QMTECH Cyclone V
| Include USB Cable: | No, Yes |
|---|
Be the first to review “MiSTer SNAC Nintendo 64 N64 Adapter”
Related products
Expansion Boards
The MiSTer FPGA Analog IO board v6.1 includes the following useful features a VGA (DB15) connector allowing for the output of a VGA/RGB/YPbPr signal depending on the cable being used, a 3.5mm audio jack with Mini-TOSLINK providing analog audio output and digital audio output, a secondary microSD card slot the functionality depends upon the core [...]
Accessories
When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board. This high quality USB 3.0 extension has a shielded [...]
Expansion Boards
This Extra Slim (XS-DS) v3.0 official memory board provides 128MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory including the Neo Geo core. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a [...]
Expansion Boards
The MiSTer FPGA AV Pro v9.2 IO board is a modular hybrid design that provides the functionality of the Digital IO board. This modular design allows it to be used as a Digital IO only for a dual SDRAM setup or as an Analog IO with the AV module. When using the AV module, it [...]
A SNAC controller adapter for MiSTer FPGA, this Serial Native Accessory Converter (SNAC) is the USB3 version which allows for the connection of console specific input devices to your MiSTer, connection of original controllers is achieved by using individual adaptors. (purchased separately) Looking for zero frames of input latency? SNAC provides this when connected to [...]
Expansion Boards
The audio input board uses a 3.5mm headphone jack for input, this MiSTer addon board is plugged into the 10 pin header labelled ‘J15 ADC CON’ located on the DE10-Nano mainboard below the Gigabit Ethernet socket. Audio tape input is currently supported within the following cores : Acorn Atom, Acorn Electron, ADCTest, AliceMC10, Amstrad, Apple-II, [...]
Expansion Boards
The BlisSTer Rev 3 board is an advanced peripheral add-on board for the MiSTer providing the following, a five port USB hub, an integrated on/off switch to control power to the MiSTer and additionally it has two low latency ports, these allow for the direct connection of Bliss-Box controller adapters to the MiSTer. If you [...]
The PSX SNAC adapter for MiSTer FPGA, this stand-alone Serial Native Accessory Converter (SNAC) adapter provides a direct interface with the MiSTer PlayStation core using native accessories such as controllers with rumble, light guns, Namco NeGcon & Jogcon etc. This dedicated adapter is a stand-alone device and should not be used in conjunction with any [...]
Reviews
There are no reviews yet.