MiSTer SNAC Playstation PSX Adapter
$18.99
Stand-alone PSX SNAC adapter for the MiSTer PlayStation core with support for original controllers, rumble, light guns, NeGcon and Jogcon pads.
Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
The PSX SNAC adapter for MiSTer FPGA, this stand-alone Serial Native Accessory Converter (SNAC) adapter provides a direct interface with the MiSTer PlayStation core using native accessories such as controllers with rumble, light guns, Namco NeGcon & Jogcon etc.
This dedicated adapter is a stand-alone device and should not be used in conjunction with any other type of SNAC adapter level shifter board. The recommended connection setup is using a short male to female USB 3.0 extension cable between the PSX adapter and the User Port on the MiSTer IO board.
Looking for a zero input lag gaming experience with the PlayStation core? Well SNAC provides this when connected to the MiSTer FPGA’s User Port. This addon provides two ports for controllers and a composite port (RCA female jack) for light guns. Offering one of the best experiences for serious gamers or speed runners who require precise and accurate gameplay using original PSX controllers and accessories without lag.
The PSX SNAC adapter even works with light guns however a CRT screen is required when using original light guns, such as the Sony PlayStation GunCon (G-Con 45) or Sony PlayStation Hyper Blaster.
The MiSTer PlayStation SNAC adapter only functions with the respective MiSTer PlayStation core.
The PSX SNAC adapter requires a MiSTer Analog IO board v6.1 or Digital IO board v1.2 and newer to function correctly. Additionally, this PlayStation SNAC adapter does support other IO board types providing they have a User IO port.
A big thank you goes out to Jonathan Dagnillo of Dinierto Designs for creating the PSX SNAC Adapter Shell for MiSTer FPGA, upon which this redesigned case is based. The original is licensed under CC BY 4.0.
As Seen On: New Retro Adventures
✅ Requires Analog IO v6.1 / Digital IO v1.2 / AV Pro v9.2
✅ Optional Right Angle USB 3.0 Extension Cable
✅ Supports Dual Shock Vibration Controllers
✅ Fully Assembled & Tested
SNAC PlayStation Adapter For MiSTer Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
✅ QMTECH Cyclone V
| Include USB Cable: | No, Yes |
|---|
Be the first to review “MiSTer SNAC Playstation PSX Adapter”
Related products
Expansion Boards
BlisSTer Rev 3 add-on board for MiSTer with a five port USB hub, integrated power switch and two low latency ports for Bliss-Box controller adapters. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Bliss-Box enabled SNAC board for MiSTer that accepts Bliss-Box controller cables through its HDMI socket, covering NES, SNES, Mega Drive and more. Related guide: how SNAC and Bliss-Box controllers compare.
Expansion Boards
Audio tape input board for MiSTer with a 3.5mm headphone jack that plugs into the DE10-Nano J15 ADC header, adding cassette loading to supported cores.
Stand-alone N64 SNAC adapter for the MiSTer Nintendo 64 core, supporting native controllers, Rumble Pak, Controller Pak, Transfer Pak and more. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
USB3 SNAC adapter for MiSTer giving zero frames of input latency when you connect original console controllers through the matching adapters sold separately. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Expansion Boards
MiSTer Laggy v1.3 is a display latency tester pairing a dedicated FPGA core with a USB sensor to measure the delay between frame and screen.
Expansion Boards
Real time clock board for MiSTer that keeps date and time between power cycles for cores such as ao486, Minimig, C64, Neo Geo, SNES and many more.
Expansion Boards
Analog IO board v6.1 for MiSTer with VGA, RGB and YPbPr output via DB15, 3.5mm analog and Mini-TOSLINK digital audio, and a second microSD slot. Related guide: what you need for a first MiSTer FPGA build.
Reviews
There are no reviews yet.