The MiSTer FPGA Digital IO Board v1.2 provides the following features, a dedicated power switch to turn the unit on and off with over-voltage protection, a 3.5mm audio jack for ADC In (Tape Input) a separate ADC-In addon board is not required, 3.5mm Mini-TOSLINK & Digital TOSLINK Connectors, a secondary microSD card slot the functionality depends upon the core being used, a fan speed control jumper providing 3.3 volts or 5 volts, three status LEDs (red, yellow, green), three large push buttons providing system reset, on screen display menu and game reset, an expansion connector in the form of a USB 3.0 connector however this is not for standard USB devices.
The MiSTer I/O Digital Board v1.2 includes a jumper for 3.3v or IO selection on the User IO port. Selecting IO provides support for Sega Mega Drive / Genesis / Master System game pads using a SNAC adapter board.
Once assembled each MiSTer FPGA Digital IO board is inspected under a microscope to ensure no solder bridges are present, the completed version 1.2 Digital IO board is fully cleaned in an ultrasonic bath to remove any flux residue left over from assembly, once clean the IO board is fully tested on a live MiSTer setup. Each IO board uses high quality branded components including Samsung Electro-Mechanics and Microchip Technology.
SW3 on the DE10-Nano board must be set to the ON position for the Digital IO board to function.
✅ MiSTer FPGA Project Official Addon Board
✅ Includes Quiet Fan or Noctua NF-A4x10 Fan
✅ Built-In On / Off Power Switch
✅ Mini-TOSLINK & Digital TOSLINK Connector
✅ 3.5mm For ADC In (Tape Input)
✅ 3 User Buttons & 3 Status LEDs
✅ Secondary MicroSD Slot
✅ User IO Port Connector
✅ Headers For External Push Buttons & LEDs
✅ DC to DC Power Cable Included
✅ Fully Assembled & Tested
Digital IO Board v1.2 Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V
| Fan Type: | Standard Fan, Noctua NF-A4x10, Fan Not Required |
|---|
Be the first to review “MiSTer Digital IO Board v1.2”
Related products
Expansion Boards
Some cores such as the ao486 (PC), Archie (Acorn Archimedes), BBC Micro Master 128K, Color Computer 3 (CoCo3), Commodore 64 (C64), Game Boy, Game Boy Color, Game Boy Advance, Minimig (Amiga), NeoGeo, MSX, SNES (Super Nintendo), TSConf (ZX Spectrum), QL (Sinclair QL), Zet98 (PC-98), ZXNext (ZX Spectrum Next), PC8801, X68000 use a clock, so MiSTer [...]
This Serial Native Accessory Converter (SNAC) board is the Bliss-Box enabled version allowing for the connection of Bliss-Box controller adapter cables via the boards HDMI socket. SNAC enabled MiSTer cores include NES / Famicom, SNES, Sega Master System, Sega Mega Drive / Genesis, Sega Mega CD, Sega 32X, Atari 5200 / 7800, TurboGrafx-16 / TurboGrafx [...]
Expansion Boards
This is the official MiSTer project endorsed mt32-pi HAT for the Raspberry Pi offering a solution to directly connect the Raspberry Pi to the MiSTer, without the need for separate power, audio, or MIDI cabling. Overall a simple plug and play Munt and FluidSynth solution. Many of the MiSTer computer cores support external MIDI hardware, [...]
Expansion Boards
This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the [...]
A SNAC controller adapter for MiSTer FPGA, this Serial Native Accessory Converter (SNAC) is the USB3 version which allows for the connection of console specific input devices to your MiSTer, connection of original controllers is achieved by using individual adaptors. (purchased separately) Looking for zero frames of input latency? SNAC provides this when connected to [...]
Expansion Boards
The MiSTer Laggy is a display latency tester designed for use with the MiSTer FPGA system. Comprising of a dedicated core running on the MiSTer FPGA and the hardware sensor connected to the MiSTer’s User Port via a USB type A to type C cable. MiSTer Laggy measures the time between when a frame is [...]
Expansion Boards
The BlisSTer Rev 3 board is an advanced peripheral add-on board for the MiSTer providing the following, a five port USB hub, an integrated on/off switch to control power to the MiSTer and additionally it has two low latency ports, these allow for the direct connection of Bliss-Box controller adapters to the MiSTer. If you [...]
The MiSTer FPGA’s N64 SNAC adapter is a stand-alone Serial Native Accessory Converter (SNAC) adapter that provides a direct interface with the MiSTer Nintendo 64 core. It enables seamless integration with native controllers and accessories, including the Rumble Pak, Controller Pak, Transfer Pak, VRU (Voice Recognition Unit), Keyboard, Mouse, and Microphone. Seeking a zero input [...]
Reviews
There are no reviews yet.