Show off your MiSTer’s insides with a transparent case!
This stylish case is designed for the perfect protection of your MiSTer. The top of the case has ventilation slots to allow airflow from an IO board mounted fan, also three 3D printed button spacers allow you to use your MiSTer IO boards user push buttons as intended. Another benefit due to the transparent nature of the case is all the LED’s are still visible through the casing, finally the MiSTer FPGA logo has been laser engraved for a touch of style.
The MiSTer acrylic case is suitable for official project USB hubs, the supported versions are v1.2 and v2.1, all hub to DE10 Nano micro USB connector types are supported these being the MiSTer USB bracket and the short and long MiSTer USB bridge connectors. The case is also compatible with the real time clock board (RTC) and the audio tape input board (ADC In).
The MiSTer case fitting kit includes all required parts to install the case onto your MiSTer build. The fitting kit contains eight brass stand-offs, eight screws and four silicone stick on anti-slip feet for the bottom to keep your MiSTer case stable.
Acrylic Case Build Instructions:
MiSTer FPGA Digital IO Board Assembly Tutorial 2023
New Retro Adventures MiSTer Assembly & Acrylic Case Upgrade
MiSTer Acrylic Case Assembly Guide Analog IO Version
MiSTer Acrylic Case Assembly Guide Digital IO Version
✅ Precision Laser Cut & Engraved
✅ Manufactured From Perspex® Cast Acrylic
✅ All Ports Feature Laser Engraved Labels
✅ Fitting Kit Included
MiSTer Acrylic Case Compatibility:
✅ Terasic DE10-Nano
❌ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V
| MiSTer Case Colour: | Neptune Blue, Crystal Clear, Looking Glass, Shadow Grey, Acid Green, Helios Yellow |
|---|---|
| IO Board Type: | Analog IO v5.5 – v6.1, Digital IO v1.2, A/V Pro IO v9.2 |
Be the first to review “MiSTer Case Acrylic”
Related products
When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board. This high quality USB 3.0 extension has a shielded [...]
If your MiSTer build has no need of an IO board but you still want an active cooling solution, while also providing protection to your build and looking good, then the acrylic fan plate kit is what you need. Included with the MiSTer fan plate kit is a cast acrylic top plate finished in either [...]
Accessories
A one meter long mains cable featuring an IEC C13 connector on one end and an 3 pin UK moulded plug on the other. This power lead transfers mains power from a UK mains socket to a device with an IEC inlet. Designed for use with IEC C14 devices such as the high quality MiSTer [...]
Cooling
A minimal cost effective active cooling solution for your MiSTer build, if you do not require an IO Board but still wish to adequately cool the ARM / FPGA chip this is the perfect solution a super quiet fan, mounted on a solid aluminium heatsink. Installation is simple just remove the film from the thermal [...]
Accessories
Building a custom case to house your MiSTer? If you need to add external push buttons and LEDs this pair of extension leads allows you to remotely mount buttons and LEDs. The pair of leads connect to the 5 pin and 7 pin header sockets on MiSTer Digital and Analog IO boards. The circuit diagrams [...]
Cooling
The NF-A4x10 5V is a specialized 5V variant of Noctua’s exceptional 40x10mm fan, renowned for its outstanding performance and superior low noise properties. This fan incorporates cutting-edge aerodynamic design features like Flow Acceleration Channels and an AAO standard frame. The Noctua fan is an exceptional choice for your MiSTer FPGA, offering outstanding running smoothness and [...]
Accessories
The power supply splitter cable is connected to the male end of the power supply or the male end of an inline power switch, with two male connectors at each end of the splitter plugging directly into the DE-10 Nano board and USB hub board. ✅ For Original & Aftermarket Power Supplies ✅ High Quality [...]
Accessories
When connecting the Raspberry Pi based MT32-Pi to the MiSTer via a USB 3.0 A-to-A cable, it’s important to use a short cable to ensure stable performance, this MT32-Pi USB 3.0 cable is the perfect choice. Since I²C is not intended for long-distance transmission, longer cables can cause degradation due to capacitance or signal reflections. [...]
Reviews
There are no reviews yet.