The USB Hub v2.1 board provides 7 USB ports for the MiSTer FPGA, if you need to connect multiple USB devices this is a very useful add-on board, offering a neat minimalist connection solution via the provided Micro USB Bracket Connector which connects directly into the header installed on the USB hub board and then via the right angled gold plated micro USB connector into the DE10 Nano board. A power splitter cable is also included along with four brass hex stand-offs.
The updated official MiSTer USB Hub v2.1 add-on board has the new VBUS control circuit installed, this additional protection IC is used for USB power cycling to help some USB devices reinitialise upon reset. Also present is an additional USB power only socket, this is marked PWR1 on the board and provides a powered only USB socket.
Each USB hub add on board for the MiSTer FPGA are checked under a microscope to ensure no solder bridges are present, the complete USB hub board is fully cleaned in an ultrasonic bath to remove any flux residue left over from assembly. Each USB hub board uses high quality branded components including KEMET and Samsung.
✅ Includes USB Hub Micro USB Bracket Connector
✅ Includes Power Splitter Lead & Brass Stand-offs
✅ Fully Assembled & Tested
USB Hub v2.1 Compatibility:
✅ Terasic DE10-Nano
❌ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V
| Option1 | Option1 |
|---|
Be the first to review “USB Hub v2.1 For MiSTer”
Related products
The MiSTer FPGA’s N64 SNAC adapter is a stand-alone Serial Native Accessory Converter (SNAC) adapter that provides a direct interface with the MiSTer Nintendo 64 core. It enables seamless integration with native controllers and accessories, including the Rumble Pak, Controller Pak, Transfer Pak, VRU (Voice Recognition Unit), Keyboard, Mouse, and Microphone. Seeking a zero input [...]
The PSX SNAC adapter for MiSTer FPGA, this stand-alone Serial Native Accessory Converter (SNAC) adapter provides a direct interface with the MiSTer PlayStation core using native accessories such as controllers with rumble, light guns, Namco NeGcon & Jogcon etc. This dedicated adapter is a stand-alone device and should not be used in conjunction with any [...]
Expansion Boards
This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the [...]
Expansion Boards
Some cores such as the ao486 (PC), Archie (Acorn Archimedes), BBC Micro Master 128K, Color Computer 3 (CoCo3), Commodore 64 (C64), Game Boy, Game Boy Color, Game Boy Advance, Minimig (Amiga), NeoGeo, MSX, SNES (Super Nintendo), TSConf (ZX Spectrum), QL (Sinclair QL), Zet98 (PC-98), ZXNext (ZX Spectrum Next), PC8801, X68000 use a clock, so MiSTer [...]
Expansion Boards
The MiSTer Laggy is a display latency tester designed for use with the MiSTer FPGA system. Comprising of a dedicated core running on the MiSTer FPGA and the hardware sensor connected to the MiSTer’s User Port via a USB type A to type C cable. MiSTer Laggy measures the time between when a frame is [...]
Accessories
If you have a MiSTer USB Hub with a wired Micro USB cable attached, and wish to streamline your MiSTer setup this connector kit offers a neat low profile connection via a right angled gold plated Micro USB connector which plugs into the DE10 Nano boards Micro USB socket, the 4 pin socket plugs directly [...]
Expansion Boards
The audio input board uses a 3.5mm headphone jack for input, this MiSTer addon board is plugged into the 10 pin header labelled ‘J15 ADC CON’ located on the DE10-Nano mainboard below the Gigabit Ethernet socket. Audio tape input is currently supported within the following cores : Acorn Atom, Acorn Electron, ADCTest, AliceMC10, Amstrad, Apple-II, [...]
Expansion Boards
This is the official MiSTer project endorsed mt32-pi HAT for the Raspberry Pi offering a solution to directly connect the Raspberry Pi to the MiSTer, without the need for separate power, audio, or MIDI cabling. Overall a simple plug and play Munt and FluidSynth solution. Many of the MiSTer computer cores support external MIDI hardware, [...]
Reviews
There are no reviews yet.