The PSX SNAC adapter for MiSTer FPGA, this stand-alone Serial Native Accessory Converter (SNAC) adapter provides a direct interface with the MiSTer PlayStation core using native accessories such as controllers with rumble, light guns, Namco NeGcon & Jogcon etc.
This dedicated adapter is a stand-alone device and should not be used in conjunction with any other type of SNAC adapter level shifter board. The recommended connection setup is using a short male to female USB 3.0 extension cable between the PSX adapter and the User Port on the MiSTer IO board.
Looking for a zero input lag gaming experience with the PlayStation core? Well SNAC provides this when connected to the MiSTer FPGA’s User Port. This addon provides two ports for controllers and a composite port (RCA female jack) for light guns. Offering one of the best experiences for serious gamers or speed runners who require precise and accurate gameplay using original PSX controllers and accessories without lag.
The PSX SNAC adapter even works with light guns however a CRT screen is required when using original light guns, such as the Sony PlayStation GunCon (G-Con 45) or Sony PlayStation Hyper Blaster.
The MiSTer PlayStation SNAC adapter only functions with the respective MiSTer PlayStation core.
The PSX SNAC adapter requires a MiSTer Analog IO board v6.1 or Digital IO board v1.2 and newer to function correctly. Additionally, this PlayStation SNAC adapter does support other IO board types providing they have a User IO port.
A big thank you goes out to Jonathan Dagnillo of Dinierto Designs for creating the PSX SNAC Adapter Shell for MiSTer FPGA, upon which this redesigned case is based. The original is licensed under CC BY 4.0.
As Seen On: New Retro Adventures
✅ Requires Analog IO v6.1 / Digital IO v1.2 / AV Pro v9.2
✅ Optional Right Angle USB 3.0 Extension Cable
✅ Supports Dual Shock Vibration Controllers
✅ Fully Assembled & Tested
SNAC PlayStation Adapter For MiSTer Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
✅ QMTECH Cyclone V
| Include USB Cable: | No, Yes |
|---|
Be the first to review “MiSTer SNAC Playstation PSX Adapter”
Related products
Expansion Boards
The USB Hub v2.1 board provides 7 USB ports for the MiSTer FPGA, if you need to connect multiple USB devices this is a very useful add-on board, offering a neat minimalist connection solution via the provided Micro USB Bracket Connector which connects directly into the header installed on the USB hub board and then [...]
Expansion Boards
This Extra Slim (XS-DS) v3.0 official memory board provides 128MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory including the Neo Geo core. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a [...]
This Serial Native Accessory Converter (SNAC) board is the Bliss-Box enabled version allowing for the connection of Bliss-Box controller adapter cables via the boards HDMI socket. SNAC enabled MiSTer cores include NES / Famicom, SNES, Sega Master System, Sega Mega Drive / Genesis, Sega Mega CD, Sega 32X, Atari 5200 / 7800, TurboGrafx-16 / TurboGrafx [...]
Expansion Boards
The MiSTer FPGA Digital IO Board v1.2 provides the following features, a dedicated power switch to turn the unit on and off with over-voltage protection, a 3.5mm audio jack for ADC In (Tape Input) a separate ADC-In addon board is not required, 3.5mm Mini-TOSLINK & Digital TOSLINK Connectors, a secondary microSD card slot the functionality depends [...]
Accessories
When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board. This high quality USB 3.0 extension has a shielded [...]
Expansion Boards
Some cores such as the ao486 (PC), Archie (Acorn Archimedes), BBC Micro Master 128K, Color Computer 3 (CoCo3), Commodore 64 (C64), Game Boy, Game Boy Color, Game Boy Advance, Minimig (Amiga), NeoGeo, MSX, SNES (Super Nintendo), TSConf (ZX Spectrum), QL (Sinclair QL), Zet98 (PC-98), ZXNext (ZX Spectrum Next), PC8801, X68000 use a clock, so MiSTer [...]
A SNAC controller adapter for MiSTer FPGA, this Serial Native Accessory Converter (SNAC) is the USB3 version which allows for the connection of console specific input devices to your MiSTer, connection of original controllers is achieved by using individual adaptors. (purchased separately) Looking for zero frames of input latency? SNAC provides this when connected to [...]
Expansion Boards
The BlisSTer Rev 3 board is an advanced peripheral add-on board for the MiSTer providing the following, a five port USB hub, an integrated on/off switch to control power to the MiSTer and additionally it has two low latency ports, these allow for the direct connection of Bliss-Box controller adapters to the MiSTer. If you [...]
Reviews
There are no reviews yet.