The MiSTer FPGA AV Pro v9.2 IO board is a modular hybrid design that provides the functionality of the Digital IO board. This modular design allows it to be used as a Digital IO only for a dual SDRAM setup or as an Analog IO with the AV module. When using the AV module, it offers users 24-bit analog video output and crystal-clear stereo audio via an onboard audio DAC. It also includes the following features: a 3.5mm Mini-TOSLINK digital audio connector, a secondary microSD card slot (functionality depends on the core being used), a high and low fan speed control jumper on the underside of the IO board (providing 3.3 volts or 5 volts), three status LEDs (red, yellow, green), and three large push buttons for system reset, on-screen display menu, and game reset. Additionally, it features a User Port connector in the form of a USB 3.0 socket for SNAC and the MT-32 Pi.
Once assembled, each MiSTer FPGA A/V Pro IO board is inspected under a microscope to ensure no solder bridges are present. The completed A/V Pro IO v9.2 board is then fully cleaned in an ultrasonic bath to remove any flux residue left from assembly. After cleaning, the IO board is thoroughly tested on a live MiSTer setup. Each IO board uses high-quality branded components, including Samsung Electro-Mechanics and ADV®
The new A/V Pro IO v9.2 is also compatible with existing Analog IO board based MiSTer cases.
Configuring the A/V Pro v9.2 requires all four of the slide switches on the FPGA development board to be set to the OFF position.
✅ Official MiSTer FPGA Project Addon Board
✅ 24 Bit ADV Video DAC
✅ Audio DAC For Crystal Clear Audio
✅ Mini TOSLINK Digital Audio
✅ ADC-In v1.3 (For Audio / Tape / Cassette Input)
✅ Simultaneous HDMI and Analog Audio/Video Output
✅ 3 User Buttons & 3 Status LEDs
✅ Secondary MicroSD Slot
✅ User IO Connector
✅ Headers For External Push Buttons & LEDs
✅ Fully Assembled & Tested
MiSTer A/V Pro v9.2 Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V
| Fan Type: | Standard Fan, Noctua NF-A4x10, Fan Not Required |
|---|
Be the first to review “MiSTer IO Board A/V Pro v9.2”
Related products
Are you looking for some additional individual controller adapters for your USB SNAC board? No problem just select which you need! MiSTer SNAC support is enabled in the following cores including SNES, NES, Sega Master System, Genesis / Mega Drive, Mega CD, 32X, Atari 7800 and TurboGrafx-16 / TurboGrafx CD. The number of supported cores [...]
The PSX SNAC adapter for MiSTer FPGA, this stand-alone Serial Native Accessory Converter (SNAC) adapter provides a direct interface with the MiSTer PlayStation core using native accessories such as controllers with rumble, light guns, Namco NeGcon & Jogcon etc. This dedicated adapter is a stand-alone device and should not be used in conjunction with any [...]
Expansion Boards
The BlisSTer Rev 3 board is an advanced peripheral add-on board for the MiSTer providing the following, a five port USB hub, an integrated on/off switch to control power to the MiSTer and additionally it has two low latency ports, these allow for the direct connection of Bliss-Box controller adapters to the MiSTer. If you [...]
Expansion Boards
This Extra Slim (XS-DS) v3.0 official memory board provides 128MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory including the Neo Geo core. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a [...]
A SNAC controller adapter for MiSTer FPGA, this Serial Native Accessory Converter (SNAC) is the USB3 version which allows for the connection of console specific input devices to your MiSTer, connection of original controllers is achieved by using individual adaptors. (purchased separately) Looking for zero frames of input latency? SNAC provides this when connected to [...]
Expansion Boards
The MiSTer Laggy is a display latency tester designed for use with the MiSTer FPGA system. Comprising of a dedicated core running on the MiSTer FPGA and the hardware sensor connected to the MiSTer’s User Port via a USB type A to type C cable. MiSTer Laggy measures the time between when a frame is [...]
Expansion Boards
The MiSTer FPGA Digital IO Board v1.2 provides the following features, a dedicated power switch to turn the unit on and off with over-voltage protection, a 3.5mm audio jack for ADC In (Tape Input) a separate ADC-In addon board is not required, 3.5mm Mini-TOSLINK & Digital TOSLINK Connectors, a secondary microSD card slot the functionality depends [...]
Expansion Boards
The USB Hub v2.1 board provides 7 USB ports for the MiSTer FPGA, if you need to connect multiple USB devices this is a very useful add-on board, offering a neat minimalist connection solution via the provided Micro USB Bracket Connector which connects directly into the header installed on the USB hub board and then [...]
Reviews
There are no reviews yet.