A minimal cost effective active cooling solution for your MiSTer build, if you do not require an IO Board but still wish to adequately cool the ARM / FPGA chip this is the perfect solution a super quiet fan, mounted on a solid aluminium heatsink.
Installation is simple just remove the film from the thermal adhesive tape on the base of the heatsink, firmly push the heatsink down onto the Cyclone® V SoC, next connect the two pin Dupont connectors red wire to pin 11 (5V) and the black wire to pin 12 (GND) on either of the GPIO 0 or GPIO 1 headers.
View DE10-Nano GPIO Expansion Header Pin Arrangement
✅ Suitable For DE10-Nano FPGA Board
✅ Excellent Active FPGA Cooling
✅ Super Quiet Fan Only 22 dB(A)
✅ Solid Aluminium Heatsink
MiSTer Fan and Heatsink Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
✅ QMTECH Cyclone V
| Option1 | Option1 |
|---|
Be the first to review “MiSTer Fan and Heatsink”
Related products
When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board. This high quality USB 3.0 extension has a shielded [...]
Accessories
This neat little plug designed and produced by MiSTer Addons allows you to connect the Digital IO board and DE10-Nano DC power sockets together. The DC jumper is only used with the Digital IO board or BlisSTer board. To use the built in Digital IO board power switch, simply link your power supply to the [...]
Accessories
The power supply splitter cable is connected to the male end of the power supply or the male end of an inline power switch, with two male connectors at each end of the splitter plugging directly into the DE-10 Nano board and USB hub board. ✅ For Original & Aftermarket Power Supplies ✅ High Quality [...]
Accessories
A male DC jack to male DC jack jumper cable, this is perfect for use with a MiSTer Digital IO board allowing for powering of the USB Hub directly from the DE10-Nano. If you are using the Digital I/O MiSTer addon board just connect your DE10-Nano power supply into the Digital IO boards DC power [...]
Accessories
When connecting the Raspberry Pi based MT32-Pi to the MiSTer via a USB 3.0 A-to-A cable, it’s important to use a short cable to ensure stable performance, this MT32-Pi USB 3.0 cable is the perfect choice. Since I²C is not intended for long-distance transmission, longer cables can cause degradation due to capacitance or signal reflections. [...]
The hybrid ARM / FPGA chip can reach very high temperatures when running complex MiSTer cores effecting overall stability resulting in errors or crashes. This is the ultimate MiSTer heatsink, produced from a solid copper bar, the fins are manufactured by accurately peeling each fin from the bar of solid copper, they are an integral [...]
Accessories
When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board. This high quality USB 3.0 extension has a shielded [...]
Cooling
The NF-A4x10 5V is a specialized 5V variant of Noctua’s exceptional 40x10mm fan, renowned for its outstanding performance and superior low noise properties. This fan incorporates cutting-edge aerodynamic design features like Flow Acceleration Channels and an AAO standard frame. The Noctua fan is an exceptional choice for your MiSTer FPGA, offering outstanding running smoothness and [...]
Reviews
There are no reviews yet.