If your MiSTer USB Hub has a Micro USB socket installed, and you wish to streamline your MiSTer setup, this bridge connection offers a neat solution via two long Micro USB connectors, one plugs into the DE10-Nano boards Micro USB socket and the other plugs in the Micro USB socket on your MiSTer USB Hub or BlisSTer board.
✅ Suitable For MiSTer USB Hub & BlisSTer Board
✅ Long Micro USB Connectors
| Connector Spacing: | Standard, Alternate |
|---|
Be the first to review “MiSTer USB Bridge Long Connectors”
Related products
Accessories
If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket [...]
Accessories
If you are looking for the best, this is a high quality power supply for your MiSTer FPGA setup, you need look no further as this is possibly the ultimate MiSTer power supply providing clean power at 5 volts and up to 4 amps, plenty of overhead for any additional power requirements. Mean Well are [...]
Accessories
This neat little plug designed and produced by MiSTer Addons allows you to connect the Digital IO board and DE10-Nano DC power sockets together. The DC jumper is only used with the Digital IO board or BlisSTer board. To use the built in Digital IO board power switch, simply link your power supply to the [...]
Accessories
The power supply splitter cable is connected to the male end of the power supply or the male end of an inline power switch, with two male connectors at each end of the splitter plugging directly into the DE-10 Nano board and USB hub board. ✅ For Original & Aftermarket Power Supplies ✅ High Quality [...]
Accessories
A compact USB WiFi dongle perfect for use with the MiSTer FPGA. Firstly plug the WiFi adapter into a USB port, then to configure the WiFi adapter just run the script wifi.sh either from the Menu core on the MiSTer FPGA or via SSH. Reboot the MiSTer once WiFi network configuration has been completed. If [...]
Accessories
When using a SNAC adapter with the MiSTer to avoid any strain on the User IO port, the recommended connection setup is to use a short male to female USB 3.0 extension cable between the SNAC adapter and the User Port on the MiSTer IO board. This high quality USB 3.0 extension has a shielded [...]
Accessories
A male DC jack to male DC jack jumper cable, this is perfect for use with a MiSTer Digital IO board allowing for powering of the USB Hub directly from the DE10-Nano. If you are using the Digital I/O MiSTer addon board just connect your DE10-Nano power supply into the Digital IO boards DC power [...]
Accessories
Building a custom case to house your MiSTer? If you need to add external push buttons and LEDs this pair of extension leads allows you to remotely mount buttons and LEDs. The pair of leads connect to the 5 pin and 7 pin header sockets on MiSTer Digital and Analog IO boards. The circuit diagrams [...]
Reviews
There are no reviews yet.