This is the official MiSTer project endorsed mt32-pi HAT for the Raspberry Pi offering a solution to directly connect the Raspberry Pi to the MiSTer, without the need for separate power, audio, or MIDI cabling. Overall a simple plug and play Munt and FluidSynth solution.
Many of the MiSTer computer cores support external MIDI hardware, such as the ao486 (PC), Minimig (Amiga), Atari ST and the Sharp X68000 cores. The MT32-pi addon HAT allows you to listen to the amazing MIDI music supported in many classic games.
You can be confident in knowing each MiSTer FPGA MT-32 Pi HAT v2.1 board has been tested before despatch on a Raspberry Pi 3 Model A+ connected to a live MiSTer setup.
Dale Whinham is the project developer, the project GitHub and mt32-pi wiki contains all the information needed on setting up a Raspberry Pi 3 or later as a Roland MT-32 emulator.
Additional specific MiSTer FPGA configuration and connection related information is located here on GitHub.
Please see the mt32-pi project FAQ page for answers to the most common questions about the mt32-pi.
At MiSTerFPGA.co.uk I aim to support the community, by purchasing from me you are supporting the project developers Dale Whinham (d0pefish) and Alexey Melnikov (Sorgelig) for every mt32-pi HAT sold, a donation is paid to them.
As Seen On: New Retro Adventures , Video Game Esoterica
✅ Suitable For Raspberry Pi 3 or Above
✅ Fully Assembled & Tested
MT32-Pi Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
✅ QMTECH Cyclone V
| OLED Display Colour: | White, Blue, Yellow |
|---|---|
| Include USB Cable: | No, Yes |
Be the first to review “MiSTer MT32-Pi Hat v2.1”
Related products
Expansion Boards
The MiSTer FPGA Analog IO board v6.1 includes the following useful features a VGA (DB15) connector allowing for the output of a VGA/RGB/YPbPr signal depending on the cable being used, a 3.5mm audio jack with Mini-TOSLINK providing analog audio output and digital audio output, a secondary microSD card slot the functionality depends upon the core [...]
Expansion Boards
The MiSTer FPGA Digital IO Board v1.2 provides the following features, a dedicated power switch to turn the unit on and off with over-voltage protection, a 3.5mm audio jack for ADC In (Tape Input) a separate ADC-In addon board is not required, 3.5mm Mini-TOSLINK & Digital TOSLINK Connectors, a secondary microSD card slot the functionality depends [...]
The MiSTer FPGA’s N64 SNAC adapter is a stand-alone Serial Native Accessory Converter (SNAC) adapter that provides a direct interface with the MiSTer Nintendo 64 core. It enables seamless integration with native controllers and accessories, including the Rumble Pak, Controller Pak, Transfer Pak, VRU (Voice Recognition Unit), Keyboard, Mouse, and Microphone. Seeking a zero input [...]
Expansion Boards
The audio input board uses a 3.5mm headphone jack for input, this MiSTer addon board is plugged into the 10 pin header labelled ‘J15 ADC CON’ located on the DE10-Nano mainboard below the Gigabit Ethernet socket. Audio tape input is currently supported within the following cores : Acorn Atom, Acorn Electron, ADCTest, AliceMC10, Amstrad, Apple-II, [...]
Expansion Boards
This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the [...]
Expansion Boards
This Extra Slim (XS-DS) v3.0 official memory board provides 128MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory including the Neo Geo core. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a [...]
Expansion Boards
The MiSTer Laggy is a display latency tester designed for use with the MiSTer FPGA system. Comprising of a dedicated core running on the MiSTer FPGA and the hardware sensor connected to the MiSTer’s User Port via a USB type A to type C cable. MiSTer Laggy measures the time between when a frame is [...]
Expansion Boards
The BlisSTer Rev 3 board is an advanced peripheral add-on board for the MiSTer providing the following, a five port USB hub, an integrated on/off switch to control power to the MiSTer and additionally it has two low latency ports, these allow for the direct connection of Bliss-Box controller adapters to the MiSTer. If you [...]
Reviews
There are no reviews yet.