The MiSTer FPGA Analog IO board v6.1 includes the following useful features a VGA (DB15) connector allowing for the output of a VGA/RGB/YPbPr signal depending on the cable being used, a 3.5mm audio jack with Mini-TOSLINK providing analog audio output and digital audio output, a secondary microSD card slot the functionality depends upon the core being used, a fan speed control providing a 3.3 volt / 5 volt selector jumper, a status LED control jumper allowing switching on or off the built in LEDs, a Sync-on-Green switch, three status LEDs (red, yellow, green), three large push buttons providing system reset, on screen display menu and game reset, an expansion connector in the form of a USB 3.0 connector however this is not for standard USB devices.
The MiSTer I/O Board v6.1 adds one additional GPIO pin to the User IO port, providing support for the Sega Mega Drive / Genesis / Master System game pads using a SNAC board.
Once assembled each MiSTer FPGA IO board is inspected under a microscope to ensure no solder bridges are present, the completed version 6.1 IO board is fully cleaned in an ultrasonic bath to remove any flux residue left over from assembly, once clean the IO board is fully tested on a live MiSTer setup. Each IO board uses high quality branded components including Samsung Electro-Mechanics and Bourns Inc.
Configuration of the video output signal on the IO board is controlled via the MiSTer.ini file, more information on how to configure and download of the MiSTer.ini file see the MiSTer.ini configuration page.
For more information on analog video output compatibility see the MiSTer wiki.
✅ Official Addon Board For The MiSTer FPGA Project
✅ Includes Quiet Fan or Premium Noctua NF-A4x10 Fan
✅ VGA Connector (VGA / YPbPr / RGB) Video Output
✅ 3.5mm Audio Jack with Mini-TOSLINK
✅ 3 User Buttons & 3 Status LEDs
✅ Secondary MicroSD Slot
✅ Expansion Connector User IO
✅ Switchable Sync-On-Green (SOG)
✅ Headers For External Push Buttons & LEDs
✅ Fully Assembled & Tested
Analog IO Board v6.1 Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V
| Fan Type: | Standard Fan, Noctua NF-A4x10, Fan Not Required |
|---|
Be the first to review “MiSTer Analog IO Board v6.1”
Related products
Expansion Boards
The USB Hub v2.1 board provides 7 USB ports for the MiSTer FPGA, if you need to connect multiple USB devices this is a very useful add-on board, offering a neat minimalist connection solution via the provided Micro USB Bracket Connector which connects directly into the header installed on the USB hub board and then [...]
A SNAC controller adapter for MiSTer FPGA, this Serial Native Accessory Converter (SNAC) is the USB3 version which allows for the connection of console specific input devices to your MiSTer, connection of original controllers is achieved by using individual adaptors. (purchased separately) Looking for zero frames of input latency? SNAC provides this when connected to [...]
This Serial Native Accessory Converter (SNAC) board is the Bliss-Box enabled version allowing for the connection of Bliss-Box controller adapter cables via the boards HDMI socket. SNAC enabled MiSTer cores include NES / Famicom, SNES, Sega Master System, Sega Mega Drive / Genesis, Sega Mega CD, Sega 32X, Atari 5200 / 7800, TurboGrafx-16 / TurboGrafx [...]
The MiSTer FPGA’s N64 SNAC adapter is a stand-alone Serial Native Accessory Converter (SNAC) adapter that provides a direct interface with the MiSTer Nintendo 64 core. It enables seamless integration with native controllers and accessories, including the Rumble Pak, Controller Pak, Transfer Pak, VRU (Voice Recognition Unit), Keyboard, Mouse, and Microphone. Seeking a zero input [...]
Expansion Boards
This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the [...]
Expansion Boards
This Extra Slim (XS-DS) v3.0 official memory board provides 128MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory including the Neo Geo core. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a [...]
Expansion Boards
Some cores such as the ao486 (PC), Archie (Acorn Archimedes), BBC Micro Master 128K, Color Computer 3 (CoCo3), Commodore 64 (C64), Game Boy, Game Boy Color, Game Boy Advance, Minimig (Amiga), NeoGeo, MSX, SNES (Super Nintendo), TSConf (ZX Spectrum), QL (Sinclair QL), Zet98 (PC-98), ZXNext (ZX Spectrum Next), PC8801, X68000 use a clock, so MiSTer [...]
Expansion Boards
The audio input board uses a 3.5mm headphone jack for input, this MiSTer addon board is plugged into the 10 pin header labelled ‘J15 ADC CON’ located on the DE10-Nano mainboard below the Gigabit Ethernet socket. Audio tape input is currently supported within the following cores : Acorn Atom, Acorn Electron, ADCTest, AliceMC10, Amstrad, Apple-II, [...]
Reviews
There are no reviews yet.