MiSTer Digital IO Board v1.2
$26.99
Digital IO board v1.2 for MiSTer FPGA with protected power switch, 3.5mm ADC tape input, Mini-TOSLINK and TOSLINK audio plus a second microSD slot.
Related guide: what you need for a first MiSTer FPGA build.
The MiSTer FPGA Digital IO Board v1.2 provides the following features, a dedicated power switch to turn the unit on and off with over-voltage protection, a 3.5mm audio jack for ADC In (Tape Input) a separate ADC-In addon board is not required, 3.5mm Mini-TOSLINK & Digital TOSLINK Connectors, a secondary microSD card slot the functionality depends upon the core being used, a fan speed control jumper providing 3.3 volts or 5 volts, three status LEDs (red, yellow, green), three large push buttons providing system reset, on screen display menu and game reset, an expansion connector in the form of a USB 3.0 connector however this is not for standard USB devices.
The MiSTer I/O Digital Board v1.2 includes a jumper for 3.3v or IO selection on the User IO port. Selecting IO provides support for Sega Mega Drive / Genesis / Master System game pads using a SNAC adapter board.
Once assembled each MiSTer FPGA Digital IO board is inspected under a microscope to ensure no solder bridges are present, the completed version 1.2 Digital IO board is fully cleaned in an ultrasonic bath to remove any flux residue left over from assembly, once clean the IO board is fully tested on a live MiSTer setup. Each IO board uses high quality branded components including Samsung Electro-Mechanics and Microchip Technology.
SW3 on the DE10-Nano board must be set to the ON position for the Digital IO board to function.
✅ MiSTer FPGA Project Official Addon Board
✅ Includes Quiet Fan or Noctua NF-A4x10 Fan
✅ Built-In On / Off Power Switch
✅ Mini-TOSLINK & Digital TOSLINK Connector
✅ 3.5mm For ADC In (Tape Input)
✅ 3 User Buttons & 3 Status LEDs
✅ Secondary MicroSD Slot
✅ User IO Port Connector
✅ Headers For External Push Buttons & LEDs
✅ DC to DC Power Cable Included
✅ Fully Assembled & Tested
Digital IO Board v1.2 Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V
| Fan Type: | Standard Fan, Noctua NF-A4x10, Fan Not Required |
|---|
Be the first to review “MiSTer Digital IO Board v1.2”
Related products
Expansion Boards
Modular MiSTer IO board that works as Digital IO for dual SDRAM builds or adds an Analog AV module with VGA, RGB, YPbPr and analog audio output. Related guide: what you need for a first MiSTer FPGA build.
Expansion Boards
Audio tape input board for MiSTer with a 3.5mm headphone jack that plugs into the DE10-Nano J15 ADC header, adding cassette loading to supported cores.
Expansion Boards
Seven port USB hub v2.1 for MiSTer, connecting neatly to the DE10-Nano through the supplied Micro USB bracket connector so you can add multiple peripherals. Related guides: SNAC vs BlisSTer vs USB controllers and our MiSTer FPGA beginner's guide.
Expansion Boards
Extra Slim 128MB SDRAM module for MiSTer, essential for Neo Geo and other large cores that need low latency memory the DE10-Nano DDR3 cannot supply. Related guides: MiSTer SDRAM: 32MB vs 128MB and our MiSTer FPGA beginner's guide.
Expansion Boards
Analog IO board v6.1 for MiSTer with VGA, RGB and YPbPr output via DB15, 3.5mm analog and Mini-TOSLINK digital audio, and a second microSD slot. Related guide: what you need for a first MiSTer FPGA build.
Expansion Boards
Official MiSTer endorsed mt32-pi HAT that links a Raspberry Pi directly to the MiSTer with no extra power, audio or MIDI cabling for plug and play MIDI.
Bliss-Box enabled SNAC board for MiSTer that accepts Bliss-Box controller cables through its HDMI socket, covering NES, SNES, Mega Drive and more. Related guide: how SNAC and Bliss-Box controllers compare.
Stand-alone N64 SNAC adapter for the MiSTer Nintendo 64 core, supporting native controllers, Rumble Pak, Controller Pak, Transfer Pak and more. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Reviews
There are no reviews yet.