The audio input board uses a 3.5mm headphone jack for input, this MiSTer addon board is plugged into the 10 pin header labelled ‘J15 ADC CON’ located on the DE10-Nano mainboard below the Gigabit Ethernet socket.
Audio tape input is currently supported within the following cores : Acorn Atom, Acorn Electron, ADCTest, AliceMC10, Amstrad, Apple-II, Colour Genie (EG2000), Commodore 16, Commodore 64, Commodore VIC-20, CoCo2 / Dragon 32, Homelab KIT, Lynx 48 and 96, MSX1, Ondra SPO 186, Oric, Sord M5, SVI-328, TI-99/4A, Tesla PMD 85-1, ZX-Spectrum, ZX-Spectrum Next.
The ADC In addon board provides stereo input but can also be used for other analog signals with up to 250 KHz and up to 2.5 V. For more information on the MiSTer ADC In (Audio Tape Input) board and installation instructions see the MiSTer ADC page on GitHub.
✅ Fully Assembled ADC In Board v1.3
✅ MiSTer IO Board Compatible
✅ Mounting Nut & Bolt Included
✅ Spacer PCB Fitted
Audio Tape Input Board Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V
| Option1 | Option1 |
|---|
Be the first to review “Audio Tape Input Board (ADC In) v1.3”
Related products
Expansion Boards
The MiSTer FPGA Digital IO Board v1.2 provides the following features, a dedicated power switch to turn the unit on and off with over-voltage protection, a 3.5mm audio jack for ADC In (Tape Input) a separate ADC-In addon board is not required, 3.5mm Mini-TOSLINK & Digital TOSLINK Connectors, a secondary microSD card slot the functionality depends [...]
Expansion Boards
This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the [...]
This Serial Native Accessory Converter (SNAC) board is the Bliss-Box enabled version allowing for the connection of Bliss-Box controller adapter cables via the boards HDMI socket. SNAC enabled MiSTer cores include NES / Famicom, SNES, Sega Master System, Sega Mega Drive / Genesis, Sega Mega CD, Sega 32X, Atari 5200 / 7800, TurboGrafx-16 / TurboGrafx [...]
A SNAC controller adapter for MiSTer FPGA, this Serial Native Accessory Converter (SNAC) is the USB3 version which allows for the connection of console specific input devices to your MiSTer, connection of original controllers is achieved by using individual adaptors. (purchased separately) Looking for zero frames of input latency? SNAC provides this when connected to [...]
Are you looking for some additional individual controller adapters for your USB SNAC board? No problem just select which you need! MiSTer SNAC support is enabled in the following cores including SNES, NES, Sega Master System, Genesis / Mega Drive, Mega CD, 32X, Atari 7800 and TurboGrafx-16 / TurboGrafx CD. The number of supported cores [...]
Expansion Boards
The MiSTer FPGA Analog IO board v6.1 includes the following useful features a VGA (DB15) connector allowing for the output of a VGA/RGB/YPbPr signal depending on the cable being used, a 3.5mm audio jack with Mini-TOSLINK providing analog audio output and digital audio output, a secondary microSD card slot the functionality depends upon the core [...]
Expansion Boards
The MiSTer Laggy is a display latency tester designed for use with the MiSTer FPGA system. Comprising of a dedicated core running on the MiSTer FPGA and the hardware sensor connected to the MiSTer’s User Port via a USB type A to type C cable. MiSTer Laggy measures the time between when a frame is [...]
Expansion Boards
This is the official MiSTer project endorsed mt32-pi HAT for the Raspberry Pi offering a solution to directly connect the Raspberry Pi to the MiSTer, without the need for separate power, audio, or MIDI cabling. Overall a simple plug and play Munt and FluidSynth solution. Many of the MiSTer computer cores support external MIDI hardware, [...]
Reviews
There are no reviews yet.