Simple Sale Slider
Expansion Boards
The BlisSTer Rev 3 board is an advanced peripheral add-on board for the MiSTer providing the following, a five port USB hub, an integrated on/off switch to control power to the MiSTer and additionally it has two low latency ports, these allow for the direct connection of Bliss-Box controller adapters to the MiSTer. If you [...]
Featured Products Slider
Best Selling Products
Cases
Show off your MiSTer’s insides with a transparent case! This stylish case is designed for the perfect protection of your MiSTer. The top of the case has ventilation slots to allow airflow from an IO board mounted fan, also three 3D printed button spacers allow you to use your MiSTer IO boards user push buttons [...]
Accessories
If you have a MiSTer USB Hub with a wired Micro USB cable attached, and wish to streamline your MiSTer setup this connector kit offers a neat low profile connection via a right angled gold plated Micro USB connector which plugs into the DE10 Nano boards Micro USB socket, the 4 pin socket plugs directly [...]
Expansion Boards
The USB Hub v2.1 board provides 7 USB ports for the MiSTer FPGA, if you need to connect multiple USB devices this is a very useful add-on board, offering a neat minimalist connection solution via the provided Micro USB Bracket Connector which connects directly into the header installed on the USB hub board and then [...]
Cooling
If your MiSTer build has no need of an IO board but you still want an active cooling solution, while also providing protection to your build and looking good, then the acrylic fan plate kit is what you need. Included with the MiSTer fan plate kit is a cast acrylic top plate finished in either [...]
Cases
Display the inner workings of your MiSTer with this transparent case! This sleek case offers optimal protection for your MiSTer. It features ventilation slots on the top to allow airflow from the fan mounted on the IO board, and includes three 3D-printed button spacers to ensure full functionality of the IO board’s push buttons. Thanks [...]
Expansion Boards
The MiSTer FPGA Digital IO Board v1.2 provides the following features, a dedicated power switch to turn the unit on and off with over-voltage protection, a 3.5mm audio jack for ADC In (Tape Input) a separate ADC-In addon board is not required, 3.5mm Mini-TOSLINK & Digital TOSLINK Connectors, a secondary microSD card slot the functionality depends [...]
Accessories
A small and compact USB Bluetooth v4.0 dongle suitable for use with the MiSTer FPGA, using the CSR8510 chipset for maximum compatibility. Connect a number of devices simultaneously, the Bluetooth adapter also supports full backward compatibility with Bluetooth versions 2.0, 2.1 and 3.0 devices. The MiSTer Bluetooth adapter works with many popular Bluetooth based controllers [...]
Are you looking for some additional individual controller adapters for your USB SNAC board? No problem just select which you need! MiSTer SNAC support is enabled in the following cores including SNES, NES, Sega Master System, Genesis / Mega Drive, Mega CD, 32X, Atari 7800 and TurboGrafx-16 / TurboGrafx CD. The number of supported cores [...]
Lookbook style
Lookbook style 2
Grid Style
Masonery Style
The MiSTer FPGA project offers a range of addon daughter boards, these are attached to the DE10-Nano expanding functionalities. If you enjoy soldering and want to build MiSTer FPGA addon boards from scratch, you can purchase bare PCBs without components. This is ideal if you wish to source components yourself and having soldering expertise. ✅ [...]
Cooling
If your MiSTer build has no need of an IO board but you still want an active cooling solution, while also providing protection to your build and looking good, then the acrylic fan plate kit is what you need. Included with the MiSTer fan plate kit is a cast acrylic top plate finished in either [...]
Cooling
The NF-A4x10 5V is a specialized 5V variant of Noctua’s exceptional 40x10mm fan, renowned for its outstanding performance and superior low noise properties. This fan incorporates cutting-edge aerodynamic design features like Flow Acceleration Channels and an AAO standard frame. The Noctua fan is an exceptional choice for your MiSTer FPGA, offering outstanding running smoothness and [...]
The hybrid ARM / FPGA chip can reach very high temperatures when running complex MiSTer cores effecting overall stability resulting in errors or crashes. This is the ultimate MiSTer heatsink, produced from a solid copper bar, the fins are manufactured by accurately peeling each fin from the bar of solid copper, they are an integral [...]
Cooling
A minimal cost effective active cooling solution for your MiSTer build, if you do not require an IO Board but still wish to adequately cool the ARM / FPGA chip this is the perfect solution a super quiet fan, mounted on a solid aluminium heatsink. Installation is simple just remove the film from the thermal [...]
The hybrid ARM + FPGA chip can get very hot when running certain MiSTer cores as such some passive cooling is required. The main heat source in the chip is the integrated dual-core ARM producing a constant heat regardless of the FPGA core use. The more complex MiSTer cores require tight timings and lowering chip [...]
Accessories
When connecting the Raspberry Pi based MT32-Pi to the MiSTer via a USB 3.0 A-to-A cable, it’s important to use a short cable to ensure stable performance, this MT32-Pi USB 3.0 cable is the perfect choice. Since I²C is not intended for long-distance transmission, longer cables can cause degradation due to capacitance or signal reflections. [...]
Accessories
If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket [...]
Mix and match styles
The MiSTer FPGA project offers a range of addon daughter boards, these are attached to the DE10-Nano expanding functionalities. If you enjoy soldering and want to build MiSTer FPGA addon boards from scratch, you can purchase bare PCBs without components. This is ideal if you wish to source components yourself and having soldering expertise. ✅ [...]
Cooling
If your MiSTer build has no need of an IO board but you still want an active cooling solution, while also providing protection to your build and looking good, then the acrylic fan plate kit is what you need. Included with the MiSTer fan plate kit is a cast acrylic top plate finished in either [...]
Cooling
The NF-A4x10 5V is a specialized 5V variant of Noctua’s exceptional 40x10mm fan, renowned for its outstanding performance and superior low noise properties. This fan incorporates cutting-edge aerodynamic design features like Flow Acceleration Channels and an AAO standard frame. The Noctua fan is an exceptional choice for your MiSTer FPGA, offering outstanding running smoothness and [...]
The hybrid ARM / FPGA chip can reach very high temperatures when running complex MiSTer cores effecting overall stability resulting in errors or crashes. This is the ultimate MiSTer heatsink, produced from a solid copper bar, the fins are manufactured by accurately peeling each fin from the bar of solid copper, they are an integral [...]
Cooling
A minimal cost effective active cooling solution for your MiSTer build, if you do not require an IO Board but still wish to adequately cool the ARM / FPGA chip this is the perfect solution a super quiet fan, mounted on a solid aluminium heatsink. Installation is simple just remove the film from the thermal [...]
The hybrid ARM + FPGA chip can get very hot when running certain MiSTer cores as such some passive cooling is required. The main heat source in the chip is the integrated dual-core ARM producing a constant heat regardless of the FPGA core use. The more complex MiSTer cores require tight timings and lowering chip [...]
Accessories
When connecting the Raspberry Pi based MT32-Pi to the MiSTer via a USB 3.0 A-to-A cable, it’s important to use a short cable to ensure stable performance, this MT32-Pi USB 3.0 cable is the perfect choice. Since I²C is not intended for long-distance transmission, longer cables can cause degradation due to capacitance or signal reflections. [...]
Accessories
If you are using the high-quality MiSTer Mean Well power supply or any other power supply with a DC barrel plug, this adapter cable allows you to connect it to the MiSTer Pi’s USB-C power input socket. Simply plug the USB-C end into the MiSTer Pi’s power input, and then connect the female DC socket [...]