The audio input board uses a 3.5mm headphone jack for input, this MiSTer addon board is plugged into the 10 pin header labelled ‘J15 ADC CON’ located on the DE10-Nano mainboard below the Gigabit Ethernet socket.
Audio tape input is currently supported within the following cores : Acorn Atom, Acorn Electron, ADCTest, AliceMC10, Amstrad, Apple-II, Colour Genie (EG2000), Commodore 16, Commodore 64, Commodore VIC-20, CoCo2 / Dragon 32, Homelab KIT, Lynx 48 and 96, MSX1, Ondra SPO 186, Oric, Sord M5, SVI-328, TI-99/4A, Tesla PMD 85-1, ZX-Spectrum, ZX-Spectrum Next.
The ADC In addon board provides stereo input but can also be used for other analog signals with up to 250 KHz and up to 2.5 V. For more information on the MiSTer ADC In (Audio Tape Input) board and installation instructions see the MiSTer ADC page on GitHub.
✅ Fully Assembled ADC In Board v1.3
✅ MiSTer IO Board Compatible
✅ Mounting Nut & Bolt Included
✅ Spacer PCB Fitted
Audio Tape Input Board Compatibility:
✅ Terasic DE10-Nano
✅ Retro Remake MiSTer Pi
❌ QMTECH Cyclone V
| Option1 | Option1 |
|---|
Be the first to review “Audio Tape Input Board (ADC In) v1.3”
Related products
USB3 SNAC adapter for MiSTer giving zero frames of input latency when you connect original console controllers through the matching adapters sold separately. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Expansion Boards
Extra Slim 32MB SDRAM board for MiSTer, providing the precise low latency memory timings demanded by cores such as Neo Geo. For 512KB+ core memory. Related guides: MiSTer SDRAM: 32MB vs 128MB and our MiSTer FPGA beginner's guide.
Expansion Boards
BlisSTer Rev 3 add-on board for MiSTer with a five port USB hub, integrated power switch and two low latency ports for Bliss-Box controller adapters. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Stand-alone N64 SNAC adapter for the MiSTer Nintendo 64 core, supporting native controllers, Rumble Pak, Controller Pak, Transfer Pak and more. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Stand-alone PSX SNAC adapter for the MiSTer PlayStation core with support for original controllers, rumble, light guns, NeGcon and Jogcon pads. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Expansion Boards
Official MiSTer endorsed mt32-pi HAT that links a Raspberry Pi directly to the MiSTer with no extra power, audio or MIDI cabling for plug and play MIDI.
Individual controller adapters for your MiSTer SNAC board, supporting SNES, NES, Mega Drive, Master System, 32X, Atari 7800 and TurboGrafx-16 cores. Related guide: SNAC vs BlisSTer vs USB controllers on MiSTer.
Expansion Boards
Modular MiSTer IO board that works as Digital IO for dual SDRAM builds or adds an Analog AV module with VGA, RGB, YPbPr and analog audio output. Related guide: what you need for a first MiSTer FPGA build.
Reviews
There are no reviews yet.